Features:

1. PICO-ITX SBC supports Intel® 14nm Apollo Lake on-board SoC supports Intel® 14nm Apollo Lake on-board SoC
2. Dual GbE LAN support
3. Flexible expansion with M.2 A key 2230 and M.2 B key 2242 support
4. HDMI and internal LVDS for independent display
5. 12V only single voltage design for AT/ATX power by DC power jack

BIOS:
AMI UEFI BIOS

Memory:
One 204-pin 1866/1600MHz single-channel DDR3L SDRAM unbuffered SO-DIMM slot
(system max. 8GB)

Graphics Engine:
Intel® HD Graphics Gen9 Low Power, 18 Execution Units
4K Codec Decode & Encode for HEVC 4, H.264, VP8, SVC, MVC

Display Output:
1 x HDMI
1 x LVDS (2x10 pin, single channel, 24bit)

Ethernet:
LAN1: Realtek RTL8111H controller
LAN2: Realtek RTL8111H controller

External I/O interface:
2 x USB 3.0 (on rear I/O)

Internal I/O interface:
1 x RS-232 (1x9 pin, P=1.25)
1 x SATA 6Gb/s (w/ 5V SATA PWR)
2 x USB 2.0 (2 by pin header) (2x4 pin, P=2.0)

Audio:
1 x HD audio (2 x 5 pin, support 7.1 channel HD audiou by AC-KIT-892HD-R10)

Front Panel:
1 x Front panel (1 x 8 pin, power LED, HDD LED, power buttom, reset button)

Expansion:
1 x M.2 A key 2230 (PCIe, USB) 1 x M.2 B key 2242 (USB, SATA)

Digital I/O:
1 x 8-bit DIO (2x5 pin, P=2.0)

Watchdog Timer:
Software programmable support 1~255 sec. system reset

Power Supply:
12V DC input only (DC jack)
Support AT/ATX mode

Power Consumption:
12V@2.36A (Intel® Celeron® N3350 with 8GB 1600MHz DDR3L memory)

Operating Temperature:
-20°C ~ 60°C

Storage Temperature:
-10°C ~ 70°C

Humidity:
5%~95%, non-condensing

Dimensions:
100mm x 72mm

Weight:
GW:600g / NW:250g

Certifications:
CE/FCC compliant

Ordering Information

• AMC-Hyper-AL (p/n: TB003073B): PICO-ITX SBC supports Intel 14nm Intel Apollo Lake onboard SoC with DDR3L, HDMI, LVDS, Dual GbE, USB 3.0, SATA, M.2 with built-in Heatspreader