Features:

• Evaluation Carrier Board for SMARC 2.0 Modules
• Reference Carrier Board

Internal connectors:
1x PCIe x4 | 1x miniPCIe | 1x PCIe x1 | 1x M.2 socket Key E
1x SATA
1x USB 3.0 | 1x USB 2.0 | 1x micro USB 2.0 (OTG) | 1x USB Type C with PD and DP1 via Alternate Mode
2x RS-232 (1x internal RX/TX on pinheader, 1x RX/TX w/ handshake on DSUB9)
2x CAN
GPIO
1x SDIO interface
2x I²C Bus
1x eSPI/SPI1 on header
1x SPI Bus
1x FAN control
1x Disk Drive Power Output

Internal Graphic Interface:
2x24 bit LVDS connector shared with 2x eDP or 2xDSI

External Graphic Interfaces:
1x DP++
1x HDMI

Camera Interface:
2x CSI2

Audio:
I2S Audio interface and HDA interface

Buttons and LEDs:
Power button | Reset button | Sleep button | LID button | various indication LEDs

Feature Connector:
1x Standard Congatec Feature Connector

Postcode:
4x 7-Segment Postcode LEDs connected to GP_I²C bus

Temperature:
Operating: -40 .. +85°C | Storage: -20 .. +80°C

Power Input:
ATX Power Supply | 12V - 24V Wide Range Carrier Board Supply | 3.0V - 5.25V Wide Range Module Supply | USB Type C PD (12V - 20V)

Humidity:
Operating: 10 - 90% r. H. non cond. | Storage: 5 - 95% r. H. non cond.

Size:
294 x 172 mm

Ordering Information

• Conga-SEVAL (p/n: LF000853): Conga-SEVAL Evaluation Board for SMARC 2.0 Modules