conga-MCB/Qseven Mini Carrier Board for Qseven

conga MCB Qseven

Description


The conga-MCB/Qseven is a full featured, miniaturised carrier board for Qseven modules. It has an industrial 5 pin power connector with an input voltage allowance from 9V up to 20V, as well as 5V STB and therefore can be used as a stand-alone carrier board for Qseven® modules. It's also possible to use the conga-MCB/Qseven as a small evaluation platform for your battery supported application using Qseven modules or it can be directly integrated into an application.

Specification

  • Qseven® Specification rev. 1.20 compliant
  • Small size - only 95mm x 145mm
  • 1x PCI Express mini Card socket specification rev. 1.2 (under side)
  • Gigabit Ethernet connector with LEDs on front panel
  • 1x CFast socket or 1x horizontal SATA connector (bottom side)
  • 1x vertical SATA connector + 1x power JST PH header
  • 1x 8bit SD Card socket (under side)
  • 2x USB on front panel, 4x USB on 2 internal 2x5 pin 2.54 USB headers
  • 1x HDMI or DisplayPort connector on front panel (output is module dependent)
  • LVDS - Single/Dual 18/24bits 40pins 1mm Hirose connector and 4pins Backlight JST PH connector
  • Audio - 2x 3.5" Jack on front panel; 2x3pins 2.54 SPDIF I/O internal header
  • 1x SPI on 2x5 pin 2.54 header
  • 1x CAN on 5 pin connector
  • PC Beep Speaker
  • APIX2 extension on 45 pin 0.5mm FFC connector as option
  • FAN - 1x controlled standard 3 pin FAN connector
  • 5-pin power connector for wide input voltage range, 8-pin connector for conga battery module, 2-pin connector for control of an ATX power supply unit
  • Feature connector for Power, Reset, Sleep, and LID button, LED indicators, mini card WiFi radio On/Of
Ordering Information
  • Conga-MCB/Qseven SDVO (p/n: LF000646): Mini Carrier Board for Qseven with smart battery manager interface for mobile applications and SDVO display interface support for Intel mobile platforms

  • Conga-MCB/Qseven DisplayPort (p/n: LF000647): Mini Carrier Board for Qseven with smart battery manager interface for mobile applications and DisplayPort interface support

  • Conga-MCB/Qseven Cable Kit (p/n: PH003127): Complete cable kit for the Qseven Mini Carrier Board