AMC-AGP-845EV
Socket 478 pentium 4 / celeron SBC with AGP bus for add on AGP graphics card

Specification

  • Processor: Socket 478 base SBC. Supports Intel® Pentium® 4 / Celeron® with up to 533MHz FSB. Hyper-Threading Technology
  • Main Memory: Intel® 845G chipset (with ICH4)
  • Chipset: 1 x PC-1600/PC-2100 (200/266MHz) DDR SDRAM. Up to 2GB
  • Display:


    • Chipset: Integrated in Intel® 845G chipset
    • Bus: AGP 4X, 66MHz. When AGP VGA add-on card plugged in with SAGP-845EV, SAGP-845EV's internal VGA function disabled
    • V-RAM: Shared with system memory (DVMT technology)
    • Resolution: Up to 2048x1536 at 60MHz refresh rate (analog)
    • Connector: DB-15 for CRT monitor

  • I/O:


    • 2 x ATA/100 IDE channels support CD-ROM, ZIP and LS-120 bootable
    • 4 x USB 2.0 ports
    • 1 x FDD channel supports 1.44/2.88MB and 3-mode
    • 2 x RS-232 serial ports by pin header (16C550 UARTs compatible)
    • 1 x LPT parallel port by pin header supports SPP/ECP/EPP mode
    • 1 x IrDA (SIR)
    • 1 x PS/2 connector for keyboard/mouse

  • Ethernet: Onboard 10/100Mbps Fast Ethernet controller (82562ET PHY)
  • SSD: 1 x Compact Flash Type II Socket onboard
  • Audio: Onboard C-media CMI8738 5.1 channel audio chip
  • Watchdog Timer: Software programmable supports 1-255 seconds system reset
  • ATX power control function: To meet ACP1.1 specification
  • Power Consumption: +5V @ 3.6A, +12V @ 4.6A, (Intel P4 2.4G with 512K L2; 512MB DDR SDRAM)
  • Operating Temperature: 0-60°C
  • Relative humidity: 5-95%, non-condensing
Note: When using a P4 CPU below 2.5GHz, we recommend the use of the CF-512 high performance cooling fan (ordered separately). If its above 2.5GHz, a stronger cooling system is required.
 

Click to enlarge

Click here to view AGP backplane series.



Ordering Information



AMC-AGP-845EV: PIAGP Socket 478 based CPU card

AMC-CF-512: P4 CPU cooling fan for SAGP-845EV