AMC-Hyper-BT Pico-ITX SBC supports Intel® 22nm Atom/Celeron on-board SOC, VGA/iDP, Intel® GbE, USB 3.0, SATA, HD Audio, DDR3L
|
![AMC-Hyper-BT](images/amc_hyper_bt1.jpg)
Features:
- PICO-ITX SBC supports Intel® 22nm Atom™ or Celeron® on-board SoC
- 12V only single voltage design for AT/ATX power by DC power jack
- VGA and iDP support dual display
- One Key Recovery solution allows you to create rapid OS backup and recovery
Specification
CPU:
Intel® Atom™ E3845 on-board SoC (1.91GHz, quad-core, 2MB cache, TDP=10W)
Intel® Atom™ E3827 on-board SoC (1.75GHz, dual-core, 1MB cache, TDP=8W)
Intel® Atom™ E3826 on-board SoC (1.46GHz, dual-core, 1MB cache, TDP=7W)
Intel® Atom™ E3825 on-board SoC (1.33GHz, dual-core, 1MB cache, TDP=6W)
Intel® Atom™ E3815 on-board SoC (1.46GHz, dual-core, 1MB cache, TDP=5W)
Intel® Celeron® J1900 on-board SoC (2GHz, quad-core, 2MB cache, TDP=10W)
Intel® Celeron® N2930 on-board SoC (1.83GHz, quad-core, 2MB cache, TDP=7.5W)
Intel® Celeron® N2807 on-board SoC (1.58GHz, dual-core, 2MB cache, TDP=4.3W)
BIOS:
AMI UEFI BIOS
BIOS version: AIxx is for Bay-trail I model (CPU: E38xx)
BIOS version: AMxx is for Bay-trail M/D model (CPU: J1900/ N2930/ N2807)
System Memory:
One 204-pin 1066/1333 MHz single-channel DDR3L SO-DIMM supports up to 8GB (J1900, N2930, E3845, E3827, E3826) or 4GB (N2807, E3825, E3815)
Ethernet:
LAN: Intel® I211-AT PCIe controller
I/O Interfaces:
2 x RS-232 (by pin header)
1 x SATA 3Gb/s with 5V SATA power connector
1 x USB 3.0 (on rear I/O)
3 x USB 2.0 (1 on rear I/O, 2 by pin header)
Super I/O:
Fintek F81866
Audio:
Realtek ALC662 HD codec supports 5.1 channel
Display Interfaces:
Dual independent display
1 x VGA (up to 2560x1600@60Hz)
1 x iDP interface for HDMI, LVDS, VGA, DVI, DP (up to 2560x1600@60Hz)
Watchdog Timer:
Software programmable, support 1~255 sec. system reset
Power Supply:
12V DC power input only, AT/ATX supported
1 x External DC power jack
Power Consumption:
+12V@1.35A (Intel® Celeron® J1900 CPU, 1 x 4GB 1333 MHz DDR3 memory)
Graphic:
Intel® HD Graphics Gen 7 Engines with 4 execution units, supporting DX11.1 OpenGL 4.2 and OpenCL 1.2
Operating Temperature:
-20°C ~ 60°C
Storage Temperature:
-30°C ~ 70°C
Humidity:
5%~95%, non-condensing
Dimensions:
Single board: 100mm x 72mm
Heat spreader: 112mm x 78mm
Weight:
GW:600g / NW:250g
Front Panel:
1 x 6-pin (1x6) wafer for power LED & HDD LED
1 x 2-pin (1x2) wafer for power button
1 x 2-pin (1x2) wafer for power reset button
Fan Connector:
1 x 4-pin system fan connector
LAN LED:
1 x 2-pin (1x2) header
Ordering Information
- AMC-HYPER-BT-J19001 (p/n: TA003069A): PICO-ITX SBC supports Intel 22nm Celeron Quad-Core J1900 @ 2GHz (10W) on-board SoC with DDR3L, VGA/iDP, GbE, USB 3.0, SATA 3Gb/s, Audio and RoHS
- AMC-HYPER-BT-N29301 (p/n: TA003070A): PICO-ITX SBC supports Intel 22nm Quad-Core Celeron N2930 @ 1.86GHz (7.5W) on-board SoC with DDR3L, VGA/iDP, GbE, USB 2.0, SATA 3Gb/s, Audio and RoHS
- AMC-HYPER-BT-N28071 (p/n: TA003071A): PICO-ITX SBC supports Intel 22nm Dual-Core Celeron N2807 @ 1.58GHz (4.5W) on-board SoC with DDR3L, DVI-I/LVDS, GbE, USB 2.0, SATA 3Gb/s, Audio and RoHS
|