AMC-AGP-815EV
Socket 370 pentium III / celeron SBC with AGP bus for add on AGP graphics card

Specification

  • Processor: Socket 370 base SBC. Supports Pentium® III / Celeron® with 66/100/133MHz FSB
  • Main Memory: 2 x 168 pin SDRAM socket with 512MB maximum
  • Chipset: Intel® 815E stepping chipset
  • Display:


    • Chipset: Built in FW82815 chip
    • Bus: AGP 4X, 66MHz. When AGP VGA add-on card plugged in with SAGP-845EV, SAGP-845EV's internal VGA function disabled.
    • V-RAM: Shared with system memory (DVMT technology)
    • Resolution: Up to 1600x1280 at 8 bit colour
    • Connector: DB-15 for CRT monitor

  • I/O:


    • 2 x RS-232 serial ports by pin header (16C550 UARTs compatible)
    • 1 x PS/2 connector for keyboard/mouse
    • 1 x LPT parallel port by pin header supports SPP/ECP/EPP mode
    • 1 x IrDA by pin header (SIR mode)
    • 4 x USB 2.0 ports
    • 2 x ATA/100 IDE channel supports CD-ROM, ZIP and LS-120 drive bootable
    • 1 x FDD connector supports 1.44/2.88MB and 3-mode floppy drive

  • Ethernet: Onboard 10/100Mbps Fast Ethernet controller (82562ET PHY)
  • SSD: 1 x onboard Compact Flash™ Type II Socket for CF disk or Microdrive
  • Audio: Onboard C-media CMI8738 5.1 channel audio chip
  • Watchdog Timer: Software programmable supports 1-255 seconds system reset
  • Hardware Monitoring: Provides CPU Vcore, Vcc, CPU/system fan speed and temperature detecting function
  • Power control function: To meet ACP1.1 specification. Comes with 5V input external power connector
  • Power Consumption: 5V@7.6A, 12V@230mA (Intel 1GHz CPU with 256MB memory)
  • Operating Temperature: 0-60°C
  • Relative humidity: 5-95%, non-condensing
Note: When using a P4 CPU below 2.5GHz, we recommend the use of the CF-512 high performance cooling fan (ordered separately). If its above 2.5GHz, a stronger cooling system is required.
 

Click to enlarge

Click here to view AGP backplane series.